menu (Pattern Select menu) for key wipe pattern selection, and change
the pattern.
Key Edge Pattern: Combine using the dedicated pattern selected for the
color mix in the key edge fill. You can also press [Pattern Select] to
open the menu (Mix Pattern Select menu) for edge color mix dedicated
wipe pattern selection, and change the pattern.
For details, see "Carrying out a color mix for the key edge fill matte"
(page 341).
5
In the Type menu, adjust color 1 and color 2.
To adjust color 1, select [Color1], and to adjust color 2, select [Color2],
then adjust the following parameters.
Knob
1
2
3
6
To interchange color 1 and color 2, press the [Color Invert] button, turning
it on.
Key Edge Modifications
To modify the key edge of key 1 on the M/E-1 bank, use the following
procedure.
1
In the M/E-1>Key1 menu, select HF2 'Edge.'
The Edge menu appears.
2
Select the edge type in the <Edge> group.
For an overview of the key edge modifications, see "Edge modifiers"
(page 50).
Normal: unadorned edge
Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Key Setting Operations Using Menus
337