6
Key Edge Modifications
To modify the key edge of key 1 on the M/E-1 bank, use the following
procedure.
1
2
3
218
Key Setting Operations Using Menus
Knob
Parameter
Adjustment
2
Saturation
Saturation
3
Hue
Hue
To interchange color 1 and color 2, press the [Color Invert] button, turning
it on.
In the M/E-1 >Key1 menu, select HF2 'Edge.'
The Edge menu appears.
Select the edge type in the <Edge> group.
For an overview of the key edge modifications, see "Edge modifiers"
(page 198).
Normal: unadorned edge
Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
If you select [Normal], skip to step 7.
Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
Knob
Parameter
1
Width
3
Density
Adjustment
Width
Density
Setting values
0.00 to 100.00
359.99 to 0.00
Setting values
a)
0.00 to 8.00
b)
(0.00 to 100.00)
0.00 to 100.00