Important Information - Panasonic VL-SWD273 Important Information And Quick Manual

Important information

2. Important information
2.1 For your safety
To prevent severe injury and loss of life/property,
read this section carefully before using the
product to ensure proper and safe operation of
your product.
WARNING
Preventing fire and electric shock
R Use only the power source marked on the
product. If you are not sure of the type of
power supplied to your home, consult your
dealer or local power company.
R Use only the specified power supply unit, AC
adaptor, and AC cable.
R Do not attempt to disassemble or modify this
product. Contact an authorised service centre
for repairs.
R Never touch the power supply unit, AC
adaptor, and AC cable with wet hands.
R Do not touch the power supply unit, AC
adaptor, and AC cable during an electrical
storm.
R Do not use the product (excluding the
doorphone) in areas that are exposed to rain,
moisture, steam, or oily smoke, or areas that
have excessive dust.
R Do not perform any actions (such as
fabricating, twisting, stretching, bundling,
forcibly bending, damaging, altering, exposing
to heat sources, or placing heavy objects on
the power cable and the AC adaptor) that may
damage the power cable and the AC adaptor.
Using the product with a damaged power cable
or AC adaptor may cause electric shock, short
circuits, or fire. Contact an authorised service
centre for repairs.
R Do not overload the power outlet or wiring
above the specified levels. Overloading by
having many connections on one power outlet
may cause heat generation, resulting in a fire.
R Never put metal objects inside the product.
Never spill any liquid on the product (excluding
the doorphone).
If metal objects enter the product or the
product becomes wet, turn off a circuit breaker
or unplug the product from the power outlet
and contact an authorised service centre.
R Do not use a microwave oven or other devices,
such as electromagnetic cookers, to speed up
the drying process of any parts of the product.
R Completely insert the AC adaptor and AC
cable plug into the power outlet. Failure to do
so may cause electric shock and/or excessive
heat resulting in a fire. Do not use damaged
AC adaptor, AC cable plug, or power outlets.
R Regularly remove any dust, etc., from the AC
adaptor and AC cable plug by unplugging them
from the power outlets, then wiping them with a
dry cloth. Accumulated dust may cause an
insulation defect from moisture, etc., resulting
in a fire.
R Turn off a circuit breaker or unplug the product
from the power outlet if the product emits
smoke, an abnormal smell or makes unusual
noise, or if the product has been dropped or
physically damaged. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
R Hold the main body (not the metal parts) of the
AC adaptor and AC cable plug when
unplugging them. Unplugging the AC adaptor
and AC cable plug while holding their cords or
cords' plugs may result in fire, electric shock,
or injury.
Preventing accidents
R Do not use the product in health care facilities
if any regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF (radio frequency)
energy.
R Do not install or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio waves
emitted from this product may cause such
devices to malfunction, resulting in an
accident.
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF (radio
frequency) energy. (The product operates in
the frequency range of 1.88 GHz and
1.90 GHz with a peak transmission power of
250 mW (max.).)
CAUTION
Preventing accidents, injuries, and property
damage
R Do not use the product in unstable areas or
areas prone to strong vibrations. This may
cause the product to fall, resulting in damage
to the product or injury.
2. Important information
5