Brother HL-1110 Service Manual page 91

APPENDIX 2
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
(1) Check that the power switch is turned OFF. While pressing and holding the
check that all LEDs light. Then open and close the top cover. Release the
and check that all LEDs go out.
(2) Press the
(3) When completed, the machine returns to the ready state automatically.
DELETING USER SETTING
INFORMATION
button ten times.
App. 2-1
button,
button,
Confidential