Multi-Channel View For Large Operator Panels - Siemens SINUMERIK 840D sl Operating Manual

Multi-channel view

6.3 Multi-channel view for large operator panels

6.3 Multi-channel view for large operator panels
For the large OP15, OP019 operator panels as well as at the PC, there is more space in the
"Machine", "Program" and "Parameter" operating areas – as well as in all lists – to display
NC blocks, tools etc.
Further, you also have the option of simultaneously displaying more than 2 channels.
This makes it easier for you to identify the machine situation for machines with 3 and more
channels. Further, it makes it simpler for you to generate and run-in three or four-channel
programs.
Supplementary conditions
● OP15, OP19 or PC with a display of at least 1280x1024 pixels
● For operating an OP019, at least one NCU720.2 or 730.2 with 1 GB of RAM or a PCU50
3 / 4-channel view in the "Machine" operating area
If you have selected 3 channels via settings, then 3 or 4 channel columns are displayed next
to one another.
Channel view
3-channel view
4-channel view
Displaying functions
Channel view
3-channel view
4-channel view
158
is required
Display in the "Machine" operating area
The following windows are displayed one above the other for each channel:
Actual value window

T,F,S window

Block display window

The following windows are displayed one above the other for each channel:
Actual value window

T,S,F window

G functions (the "G functions" softkey is omitted)

Block display window

Display in the "Machine" operating area
Selection using vertical softkeys:
The T,F,S window is overlaid by pressing one of the vertical softkeys.

The window showing the G codes is overlaid if you press one of the

vertical softkeys.
Selection using horizontal softkeys:
Operating Manual, 02/2011, 6FC5398-6AP40-0BA0
Universal