Mounting On A Vesa Arm - GE IC755CxW07CD SERIES User Manual

4.5 Mounting on a VESA Arm

Refer to the mounting arm
manual for instructions.
Installation
For public disclosure
The QuickPanel + can be installed on a commercially available Video Electronics
Standards Association (VESA) MIS-D arm, stand, or apparatus that is listed to comply
with the UL1678 standard.
� � To mount the QuickPanel
unit as displayed in the following figures.
The IC755CxW07CDx mounting holes attach with M4 screws that are 6 mm
(0.24 in) or less in length.
The IC755CxSxxCDx mounting holes attach with M4 screws that are 8 mm
(0.32 in) or less in length.
Torque Range for Mounting M4 Screws
Unit
IC755CxW07CDx
IC755CxSxxCDx
IC755CxW07CDx VESA Mounting Holes
IC755CxSxxCDx VESA Mounting Holes
+ : use the mounting holes located on the back of the
Torque Range
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
75 mm
(2.95 in)
100 mm
(3.94 in)
GFK-2847F User Manual 33