Table of Contents
Advertisement
After connecting the USB
cable to the computer:
The LCD shows
[CONNECTION FAILED]
after pressing Internet/ WiFi
Button.
The AIR10 Connect
application cannot be
installed.
•
[DV] indicates the internal memory of the camcorder.
•
[Removable Disk] indicates the external memory (SD/SDHC/
SDXC card installed in the camcorder).
•
[AIR10 Connect] indicates the bundled program. If you want to
install this program, please double-click on it to start installation
automatically.
•
The password configuration does not match to the AP you want
to connect.
•
The AP router or the computer is not turned on. Turn the AP router
or your computer on.
•
The camcorder is not in the wireless network service area or weak
network signal. Please make sure the AP router is able to access
the Internet.
•
The camcorder does not support the type of encryption used on
the AP. This model only supports WEP/WPA/WPA2 personal type
of encryption, but not up to enterprise level.
•
Your network requires PPPoE account/password information.
•
Some AP routers do not allow you to connect to the network (e.g.
firewall).
•
Check the computer system is compatible.
54
EN
Advertisement
Table of Contents
