Philips AZ2558 User Manual page 8

MP3-CD / CD PLAYER
Programming track numbers
Program in the stop position to select and store your
CD tracks in the desired sequence. If you like, store
any track more than once. Up to 20 tracks can be
stored in the memory.
1. Press SEARCH ∞ or § on the set to select your
desired track number.(on the remote control ¡ or
™)
MP3-CD mode only:
First press ALBUM/ PRESET – or + once or more to
find your album, then press SEARCH ∞ or §. (on
the remote control ¡ or ™)
2. Press PROG.
™ Display: program and the selected track
number
™ Display :
selected for programming.
3. Repeat steps 1-2 to select and store all desired
tracks.
™ Display:
than 20 tracks.
4. To start playback of your disc program, press 2;.
Note: During normal playback, you can press PROG
to add a current track to your program list.
Reviewing the program
In stop position, press and hold down PROG for a
while until the display shows all your stored track
numbers in sequence.
=Display
Erasing a program
You can erase the program by:
• pressing 9 twice;
=
displayed briefly, and program
disappears.
• pressing STANDBY ON y
• selecting another sound source
• opening the CD door.
.appears briefly.
if no track
if you try to program more
if no tracks programmed.
GAMESOUND / USB PC LINK
GAMESOUND (See 8)
PLAYING WITH GAMESOUND:
1. Press SOURCE once or more on the set to select the
GAME•AUX function (AUX on the remote control)
=Display scrolls :
2. Connect your console to the cinches on the front
of the set AUDIO IN ( LEFT / RIGHT) and VIDEO
IN.
3. Press GAMESOUND once or more to select your
game sound option.
= Display briefly shows
or
Connecting other equipment to your system
Use the supplied video cable to connect the VIDEO
OUT terminal on the back of the set to VIDEO IN on
a TV or VCR for viewing or recording.
USB PC LINK
Quick Setup Guide
PC system requirements
– USB port with Windows 98 SE / ME/ 2000/ XP
– Intel Pentium MMXX200 or higher
– CD-ROM drive
Installing MusicMatch software
1. Use the supplied USB cable to connect the set to the
USB port on your computer. (See B)
2. Press SOURCE (USB on the remote control) once or
more to select USB PC LINK.
3. Turn on your PC then insert the supplied USB PC LINK
installer disc in the PC's CD-ROM drive. This
application software can also be downloaded from
http://www.audio.philips.com.
IMPORTANT!
Please use this customized MusicMatch
software for your USB PC Link application.
Remember to un-install all other MusicMatch
jukebox software first from your PC system (if
available).
, ,
.