Firm Load - Canon imageFORMULA DR-M160 Service Manual

2. Firm Load

The method for writing firmware varies
depending on whether that firmware has
already been registered or has not been
registered. The operation procedures are
shown below.
For registered firmware
1) Select the version to write and then
select [Registered Firm Load].
Figure 5-245
2) When the warning screen is displayed,
click [OK].
Figure 5-246
3) Writing starts automatically and the
progress screen is displayed.
COPYRIGHT © CANON ELECTRONICS INC. 2011
CHAPTER 5 TROUBLESHOOTING
4) After the process is complete, the
progress screen disappears. When the
firmware
automatically executed internally.
5) Check the version screen on the [Check
Device] screen.
For unregistered firmware
This mode has the same functionality as
Firm Load in the "Main Menu" screen.
1) Select [Firm Load].
2) When
displayed, select the file.
CANON DR-M160 FIRST EDITION
Figure 5-247
is changed, a
Figure 5-248
the file selection
reset is
screen is
5-27