Panasonic SC-AP01 Owner's Manual page 7

SC-AP01PPC~RQT9655.book 7 ページ ２０１２年２月２日 木曜日 午後１０時４２分
4
Select "Search wireless network".
5
Select and input the details.
[1] Select your home wireless network
name.*
1
[2] Type the password.
[3] Select "NEXT".
6
Perform the "Additional settings". (
If they do not apply, continue to the next
step.
7
Select "JOIN" to apply the settings.
{. In the pop-up screen select "OK" to continue.
– Select "CANCEL" to return to the setup window.
{. The Wi-Fi ® status indicator blinks blue.
– You can now close the Safari browser.
{. When the configuration is finished, the Wi-Fi
indicator lights blue.
If the Wi-Fi status indicator turns off or blinks red,
®
turn the unit off and on again, check the wireless
network password and other settings and start
again from step 1.
8
Connect your iPhone back to your home
wireless network.
*1: If you have set your wireless network to be invisible, select "BACK" and refer to "Alternative settings". (
Instead of steps 4 and 5:
Select "Manual settings".
1 Type your home wireless network name
into the "Network name (SSID)" field.
2 Select the encryption method from the
"Security system" drop down list.
3 Type the password into the "Password" field
and then select "NEXT".
In step 6:
If your home wireless network has been setup
to use specific IP Addresses, Subnet Mask,
Default Gateway, Primary DNS, etc.
Select "Advanced network settings".
{. Input the required addresses into each field and select
3
"OK".
≥ To change the settings back to DHCP, select "ON"
from the "DHCP" drop down list.
If you want to change the name of this unit that
is displayed as the AirPlay speakers.
Select "Edit STEREO SYSTEM name".
{. Only ASCII characters can be used.
right)
{. Type a new name into the "STEREO SYSTEM name"
field and select "OK".
≥ Enable Java and Cookies in your browser settings.
≥ To cancel this setting in the middle, press [Í/I] to turn off
the unit.
status
®
Alternative settings
Additional settings
(Continues to next page)
above)
7
RQT9655