Transferring The Conference - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Call pickup
>
Answer camp-on?
>
Conference?
>
Toggle/Connect?
>
Toggle?
>
Release and return?
>
Consultation?
Add on to conference?
Accepting a waiting call and adding it to the confer-
ence
If you receive a waiting call during the conference (call
waiting function is activated), you can add this user to
the conference.
An alerting tone is audible. The lamp flashes. Press the
key. You are connected to the waiting caller. The confer-
ence is placed on hold.
or service menu-controlled
Preconditions: See
A second call is shown on the display and signalled
through an alerting tone.
:
Select and confirm. You are connected to the second
caller. The other caller waits.
:
Select and confirm to add the waiting caller to the con-
ference.
or
:
Select and confirm.
:
Select and confirm (used in US).
or
:
Select and confirm to release the waiting call and return
to the conference.

Transferring the conference

Any member can transfer the conference to a nonmem-
ber called using the consultation or expand conference
functions. The new user is not yet a member of the con-
ference. The conference cannot be transferred to a call-
er whose call is answered by a member using the Call
Waiting function.
You are taking part in a conference.
:
Select and confirm. The conference is placed on hold.
p
Call a user.
or
:
Select and confirm.
p
Call a user and announce that you are transferring the
conference.
Making Calls – Convenience Functions
page 45
51