Using Call Forwarding; Activating And Deactivating Forwarding Using Features Settings; System Call Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
program/service
>
Feature settings?
>
Call forwarding?
>
Activate?
>
Deactivate?
64
If a group member lifts a handset, he or she is connect-
ed to you and the announcement is terminated.
If a group member presses the loudspeaker key or the
relevant line key for the announcement, he or she is dis-
connected from the announcement. If the last remain-
ing member of the group presses the loudspeaker key
or the line key, the announcement is terminated.

Using call forwarding

Activating and deactivating forwarding using
features settings
If a forwarding destination has been programmed for
station fixed forwarding, you can use features settings
to activate and deactivate the forwarding facility. If sta-
tion variable forwarding is activated, it can only be deac-
tivated with the switch.
Press the key. The lamp lights up.
:
Select and confirm.
:
Select and confirm.
:
Confirm.
or
:
Confirm. This deletes any destination number pro-
grammed for station variable forwarding.

System call forwarding

Forwarding of internal or external calls can be routed in-
dependently to unique destinations for each forward
type:
• unconditionally all calls
• when the line is busy
• when the call is not answered
Unconditional call forwarding should only be used if the
line is for outgoing calls only (for example, on an elevator).