Overview; System Overview; System Connection Examples - Panasonic KX-A405 Installation Manual

1 Overview

1 Overview

System Overview

A repeater is used when you need to extend the range of a DECT 6.0 Portable Station (PS) or DECT 6.0 Cell
Station (CS) connected to a PBX, to include areas where reception was previously not available. The repeater
extends the range in all directions, allowing several floors to be covered.
Up to 6 repeaters can be registered to one CS, and up to 3 repeaters can be arranged in a cascade
configuration.
The number of simultaneous calls on a CS is reduced by adding a repeater. This is by design. Each repeater
is controlled using one speech path. The repeater can support up to a maximum of 4 simultaneous calls.
Note
In this manual, the illustrations of the PBX are based on the KX-NCP500.

System Connection Examples

Example 1: Extending the range of a CS
PBX
Example 2: Connecting two IP-CSs
PBX
6 Installation Manual
CS
Repeater
Switching Hub Router
Repeater Repeater
Cascade Configuration
PS
IP Network
IP-CS Repeater
Bridging two IP-CSs (Air Synchronization)
Repeater PS
IP-CS
Document Version 2010-06