Registering The Repeater; Easy Registration - Panasonic KX-A405 Installation Manual

2 Registering the Repeater

Easy Registration

In easy registration, the repeater can be registered to a CS easily.
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be plugged
into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor may cause it to become disconnected.
Note
•
Easy registration cannot be performed if the repeater is already registered to another CS. Please follow
the procedure in "De-registration" before attempting easy registration.
•
We recommend that you power down any CS that you do not wish to connect to the repeater prior to
registration.
1.
Ensure that the repeater is turned off by disconnecting the AC adaptor.
2.
Turn on the repeater by connecting the AC adaptor.
The STATUS LED will turn amber for 2 seconds.
3.
If the repeater is unregistered, the STATUS LED will flash red, and the repeater automatically enters Easy
Registration mode.
4.
When the repeater has found a CS, the STATUS LED will turn green.
Registration is complete.
Note
If easy registration is unsuccessful within 2 minutes, the repeater will be reset and easy registration
will be repeated automatically.
Document Version 2010-06
Hook
Press plug firmly.
To AC Outlet
2 Registering the Repeater
Installation Manual 11