Procedure Overview; Registering The Repeater - Panasonic KX-A405 Installation Manual

2 Procedure Overview

2 Procedure Overview
When registering and installing the repeater, follow the procedure below to ensure smooth operation.

Registering the Repeater

Note
•
Register repeaters one by one. Do not register multiple repeaters simultaneously.
•
Do not disconnect the AC adaptor of any registered repeaters until the registration of all repeaters is
complete.
•
After the registration of all repeaters is complete, proceed to the next step—"Installing the Repeater".
a.
Place the unregistered repeater(s) (including cascade configuration repeaters) near the CS you are
attempting to register to.
b.
Turn on the repeater by connecting the AC adaptor.
c.
When registering to a CS:
The repeater is automatically registered to the CS in Easy Registration mode. For details about the easy
registration procedure, refer to "Easy Registration".
When creating a cascade configuration:
Each repeater in the cascade is automatically registered to the CS in Easy Registration mode when it is
turned on.
Then, in Manual Registration mode, register each cascade repeater to its destination repeater. For details
about the manual registration procedure, refer to "Manual Registration".
12 Installation Manual