Registering The Repeater; Easy Registration - Panasonic KX-A405 Installation Manual

3 Registering the Repeater

3 Registering the Repeater

Easy Registration

In easy registration, the repeater can be registered to a CS easily.
WARNING
•
When installing or testing a product with an external AC adaptor, the AC adaptor should be
plugged into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
•
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause
electric shock and/or excessive heat resulting in a fire.
Note
•
Easy registration cannot be performed if the repeater is already registered to another CS. In this case,
de-register the repeater before attempting easy registration. For details about the de-registration
procedure, refer to "De-registration".
•
We recommend that you power down any CS that you do not wish to connect to the repeater prior to
registration.
1.
Turn on the repeater by connecting the AC adaptor.
The STATUS LED and the RSSI/ID LED will turn amber for 2 seconds.
2.
If the repeater is unregistered, the STATUS LED will flash red, and the repeater automatically enters Easy
Registration mode.
3.
When the repeater has found a CS, the STATUS LED will turn green.
Registration is complete.
14 Installation Manual
Hook
To AC Outlet