Id Modification - Panasonic KX-A405 Installation Manual

ID Modification

In ID Modification mode, the ID of the repeater (RPN [Radio Part Number]) can be selected. Registered
repeaters are automatically assigned an ID during the registration process. This ID can be changed by following
the procedure below.
1.
In Operation mode, press the PROGRAM button to switch to ID Confirmation/Verification Tone mode.
The STATUS LED will turn amber.
2.
Press and hold down the PROGRAM button for 5 seconds.
The STATUS LED will flash amber quickly.
3.
Release the PROGRAM button to enter ID Modification mode.
The STATUS LED will turn amber.
The RSSI/ID LED will flash red once to indicate that the ID is currently set to 1.
4.
Press the PROGRAM button to select the desired ID.
The ID will change by one each time the PROGRAM button is pressed.
5.
Press and hold down the PROGRAM button for 5 seconds to assign the ID to the repeater.
The RSSI/ID LED will turn red.
6.
Release the PROGRAM button to reset the repeater.
The STATUS LED and the RSSI/ID LED will turn amber for 2 seconds and then the repeater will return to
Operation mode.
3 Registering the Repeater
Installation Manual 17