Table of Contents
Advertisement
3 Registering the Repeater
De-registration
Perform de-registration to delete the ID of the CS/repeater that the repeater is registered to.
WARNING
•
When installing or testing a product with an external AC adaptor, the AC adaptor should be
plugged into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
•
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause
electric shock and/or excessive heat resulting in a fire.
1.
While pressing and holding down the PROGRAM button, turn on the repeater by connecting the AC
adaptor.
2.
Continue to hold down the PROGRAM button for 10 seconds.
When the STATUS LED turns red, de-registration is complete.
Note
If the PROGRAM button is released after 5 seconds but before 10 seconds have elapsed, while the
STATUS LED is flashing red quickly, the repeater will enter Site Survey mode.
3.
Release the PROGRAM button to reset the repeater.
The repeater automatically enters Easy Registration mode. For details about the easy registration
procedure, refer to "Easy Registration".
16
Installation Manual
PROGRAM Button
Hook
To AC Outlet
Hide quick links:
Advertisement
Table of Contents
