JVC AV42PD20ES Service Manual page 25

(3) Setting methods
" Method of Setting 1.IF as [VCO]
(The adjustment should not be done without s ignal.)
① 1 Key ･･･････ ･････････････ ･････ Select 1.IF.
② 1 Key ･･･････ ･････････････ ････ Select 1. VCO (CW)
③ INFORMATION Key ･･･････ ･････ Return to the SERVICE MENU screen.
" Method of s etting 2.V/C, 4.DEF and 5.VSM PRESET.
① 2～5 Key･･･････ ･････････････ ･･ Select one from 2. V/C, 4. DEF and 5. VSM PRESET.
② FUNCTION UP/DOWN Key ･･････ Select s etting items.
③ FUNCTION LEFT/RIGHT Key････ Set (adjust) the setting values of the setting items.
④ MENU (OK) Key ･･･････ ････････ Memorize the s etting value.
⑤ INFORMATION Key ･･･････ ･････ Return to the SERVICE MENU screen.
" Do not adjust 3.AUDIO, 6. STATUS, 7. PIP, 8. --- , 9. SHIPPING (OFF) and 0. BUS FREE function.
(4) Release of SERVICE MENU
1) After completing the adjustment, return to the SERVICE MENU, then again press the INFORMATION key to return to the normal
screen.
Check the arrow position between the "ABOVE REF. and BELOW REF.
(Before storing the setting values in memory, do not pres s the CH, TV, POWER ON / OFF key
- if you do, the values will not be stored in memory.)
No. 51955
AV42PD20ES
25