Loading And Installation; Handling Precautions - Mitsubishi Electric AJ65SBT2B-64DA User Manual

4. LOADING AND INSTALLATION

4.1 Handling Precautions

The following is an explanation of handling precautions of the
AJ65SBT2B-64DA.
(1) Tighten screws (such as a module fixing screw) within the
tightening torque range specified in the table below.
Screw location
Module fixing screw (M4 screw)
Terminal block terminal screw (M3 screw)
Vis de borne sur plaque à bornes (vis M3)
Terminal block installation screw (M3.5 screw)
(2) When using the DIN rail, pay attention to the followings.
(a) Applicable DIN rail type (Compliant with IEC 60715)
(b) DIN rail installation screw pitch
(3) When mounting the AJ65SBT2B-64DA to the DIN rail, press with
your finger the centerline of the DIN rail hook at the bottom of the
module until it clicks.
(4) Refer to the Master Module user's manual for the name,
specification, and manufacturers of supported cables for the use
with AJ65SBT2B-64DA.
Table 4.1 Tightening torque range
TH35-7.5Fe
TH35-7.5Al
When installing a DIN rail, tighten the screws at a pitch of
200mm or less.
DIN rail
DIN rail hook
Figure 4.1 Installation to DIN rail
Tightening torque range
0.78 to 1.08N•m
0.59 to 0.88N•m
0,59 à 0,88 N•m
0.68 to 0.98N•m
9