Other Features; Set Alarm Timer; Set Sleep Timer - Philips FWM200D/12 User Manual

7 Other features

Set alarm timer

This Hi-Fi system can be used as an alarm clock.
For alarm source, you can select disc, tuner, USB
or iPod/iPhone.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) appears.
Then [SELECT SOURCE] (select
source)scrolls on the display.
2
Press source selection keys to select an
alarm source: DISC, TUNER, USB or
iPod/iPhone.
3
Press TIMER to confirm.
»
The hour digits begin to blink.
4
Press / to set hour.
5
Press TIMER to confirm.
»
The minute digits begin to blink.
6
Repeat steps 4-5 to set minute.
»
The alarm icon appears.
Note
•
In standby mode, press
activate/deactivate the alarm timer.
•
When alarm sounds, you can adjust volume by
pressing VOL +/-.
•
If Disc/USB/iPod/iPhone is selected as alarm
source, while no disc is inserted or no USB/
iPod/iPhone connected, the system switches
to tuner source instead.
TIMER repeatedly to

Set sleep timer

This Hi-Fi system can switch to standby mode
automatically after a preset time period.
Press SLEEP repeatedly to select a preset
period (in minutes).
»
When sleep timer is activated,
appears.
To deactivate sleep timer, press SLEEP repeatedly
until [SLP OFF] (sleep off) is displayed.
»
disappears.
EN 15