Adding A Function; Adding An Activity; Deleting An Activity - Philips SJM3151 Manual

When all keys are fixed and you want to return
to the Set-up menu, select "No". Press
D
Note
Fixing a key overwrites the key's data that was
stored in your universal remote for iPod™.
This means that if this key is used in an activity
this will also change.
5.4 Adding a function
You can add extra functions to your universal
remote for iPod™.
To add a function:
1. Select the option "Add a Function" in the
Set-up menu. Press
2. Select the device you want to add a
function to.
. Select the label you want to use for the
extra function.
4. Learn the function from your
original remote.
The extra function is added to your universal
remote for iPod™.
To access the extra function:
1. Press the
MAIN VOL
the Functions menu.
2. Select the function you want by using the
cursor keys. Press
D
Note
Extra functions are device-specific. They can only
be selected when in the desired AV device's
specific mode. For example, if you want to
access a TV function, the remote must be in the
TV mode.
5.5 Adding an Activity
An activity consists of several key presses that
will be sent out by your universal remote for
18
.
OK
.
OK
key to access
.
OK
iPod™ when you select the activity. You can
add up to 8 activities. One activity can contain a
maximum of 25 steps.
By default, your universal remote for iPod™
inserts a delay of 0.6 sec between every key
press to make sure your devices are responding
correctly to the signals.
You can overwrite this default delay:
• If one of your devices needs a longer delay
before receiving the next IR signal, you can
insert a delay of 1 or  seconds. Replacing the
default delay counts as a step in the activity.
• If an activity needs no delay between the
different key presses to simulate a long key
press, you can add the option "no delay".
For example: When you would like to turn the
volume up during an activity by pressing VOL
Up key four times, you do not need to insert
delays between these 4 key presses.Between
each step you add the option "no delay".
To add an activity:
1. Select the option "Add an Activity" in
the Set-up menu by using the cursor keys.
Press .
OK
D
Note
If you already have added 8 activities, you will
be asked to delete an activity. See section 5.6,

Deleting an activity.

2. Select the label from the list of activities
Press .
OK
. Follow the on-screen instructions to
create an activity.
• Use the cursor keys to select the
device. Press
to insert a key press.
• Decide if you want to add an additional
key or key delay, select
.
OK
If you do not wish to add an additional
activity, select
. Press the required key
OK
by pressing
YES
. Press .
NO OK
Use more of your Universal