Keys And Symbols; Getting Started - Siemens HKW-700 User Manual

left page (2) of CKBP HKW-700 en, A31008-H7421-A101-1-RN19 (02.08.2005, 11:02)
2 Car Kit Bluetooth

Keys and symbols

You can access your Car Kit's user in-
terface using the navigation button
and the four function keys.
Navigation (p. 2)
S
b
On/Off/End
d
Phonebook (p. 4)
(if supported by the phone)
c
Push to talk Key (p. 6)
(ptt key, activation key)
a
Voice recognition (p. 6)
(if supported by the phone)
See below for the symbols used to il-
lustrate the navigation button's
actions:
g
h
f
When a button requires a long press,
the user interface will display "press
and hold".
In all other cases a short press of the
button will suffice.
® Portable (en)
(if supported by the phone)
louder/up
quieter/down
Pressing the navigation
button confirms the
selection.

Getting started

Connecting to the phone for the
first time (Pairing)
For details on how to set up a Bluetooth
connection, please consult your phone's
user guide.
• To switch off the Car Kit, press and
b
hold .
• Activate the Car Kit's registration
mode by pressing and holding
• Activate your phone's Bluetooth
interface and start searching for
Bluetooth activated devices with-
in the range of your phone.
• When the Car Kit is located, the
phone will request you to confirm
the connection by entering a PIN.
The PIN is shown on the Car Kit
display.
• After the PIN has been entered,
the telephone ID is shown on the
Car Kit display which subsequent-
ly switches to standby mode. With
phones from other manufacturers
it may be necessary to make a con-
firmation on the phone for the Car
Kit to be able to switch to standby
mode.
The Car Kit is now ready for use. The
Car Kit and the phone can communi-
cate with one another and recognise
each other in future.
.
f