Page 1
XV-SA600BK / XV-SA602SL SERVICE MANUAL DVD AUDIO/VIDEO PLAYER XV-SA600BK / XV-SA602SL Area Suffix J ------------- U.S.A. C ---------- Canada STANDBY/ON OPEN/ CLOSE TV-/-- MUTING TITLE/ TV/VIDEO RETURN PAGE GROUP CANCEL VOL- VOL+ ENTER PREVIOUS NEXT CLEAR SELECT STROBE DVD AUDIO/DVD VIDEO/SUPER VCD/VCD/CD PLAYER...
XV-SA600BK/XV-SA602SL SECTION 1 Important Safety Precautions 1.1 Safety Precautions (1) This design of this product contains special hardware and Measure the AC voltage across the resistor with the AC many circuits and components specially for safety purposes. voltmeter. For continued protection, no changes should be made to the...
XV-SA600BK/XV-SA602SL 1.5 Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.
XV-SA600BK/XV-SA602SL 1.8 Precautions for Service 1.8.1 Handling of Traverse Unit and Laser Pickup (1) Do not touch any peripheral element of the pickup or the actuator. (2) The traverse unit and the pickup are precision devices and therefore must not be subjected to strong shock.
XV-SA600BK/XV-SA602SL SECTION 2 Disassembly method 2.1 Main body 2.1.1 Removing the top cover (see Fig.2-1) (1) Remove the two screws A attaching the top cover on both sides of the body. (2) Remove the three screws B attaching the top cover on the back of the body.
Page 8
XV-SA600BK/XV-SA602SL 2.1.5 Removing the rear panel (see Fig.2-5) • Prior to performing the following procedure, remove • the top cover. Rear panel (1) Remove the twelve screws F attaching the rear panel on the back of the body. Fig.2-5 2.1.6 Removing the front panel assembly (see Fig.2-6,2-7)
XV-SA600BK/XV-SA602SL 2.2 Loading assembly section 2.2.1 Removing the clamper assembly (See Fig.2-8) (1) Remove the four screws A attaching the clamper assembly. (2) Move the clamper in the direction of the arrow to release the two joints a on both sides.
Page 10
XV-SA600BK/XV-SA602SL 2.2.3 Removing the traverse mechanism assembly (See Fig.2-11 and 2-12) • Prior to performing the following procedure, remove the clamper assembly and the tray. (1) Remove the four screws B attaching the traverse Traverse mechanism mechanism assembly. assembly ATTENTION:...
Page 11
XV-SA600BK/XV-SA602SL 2.2.5 Removing the motor assembly (See Fig.2-14 and 2-15) • Prior to performing the following procedure, remove the clamper assembly, the tray.the traverse mechanism assembly and the elevator. Belt (1) Remove the belt from the pulley. (2) Remove the screw C attaching the motor assembly.
Page 12
XV-SA600BK/XV-SA602SL Pulley gear Idle gear Pulley gear bracket Pulley gear Idle gear Pulley gear bracket Tads h Pulley gear Motor assembly Fig.2-16 2.2.6 Removing the Idle gear/pully gear/ middle gear/slitecam (See Fig.2-16 to 2-18) • Prior to performing the followong procedure,remove...
XV-SA600BK/XV-SA602SL 2.3 Traverse mechanism assembly section 2.3.1 Removing the feed motor assembly Feed motor assembly (See Fig.2-19) (1) Unsolder the two soldering j on the spindle motor board. (2) Remove the four screws F attaching the feed motor assembly. Pickup...
Page 14
XV-SA600BK/XV-SA602SL 2.3.3 Removing the pickup (See Fig.2-23 and 2-25) Pickup (1) Remove the screw I attaching the T spring (S) and the Joint n shaft holder. Remove also the plate. Shaft holder ATTENTION: When reattaching,make sure that the T spring (S) presses the shaft.
Page 15
XV-SA600BK/XV-SA602SL 2.3.5 Removing the spindle motor assembly (See Fig.2-26 to 2-28) (1) Remove the three screws L attaching the spindle motor on the bottom of the mechanism base. ATTENTION: When reattaching, pass the card wire extending from the spindle motor board through the notch of the spindle base.
XV-SA600BK/XV-SA602SL SECTION 3 Adjustment method 3.1 Test mode setting method (1) Take out the disc and close the tray. (2) Unplug the power plug. (3) Insert power plug into outlet while pressing both "PLAY" key and "STOP" key of the main body.
XV-SA600BK/XV-SA602SL 3.4 Display of current value of laser (1) Makes to test mode and initializes. (2) When "CHOICE" key of remote controller is pushed four times, It is displayed on the FL display, "CHECK". (3) Afterwards, the laser current value can be switched by pushing the key to remote controller without turning on the disc.
XV-SA600BK/XV-SA602SL 3.6 Upgrading of firmware (1) The power supply is turned on pushing the "POWER" key. (2) The up-grade disc is inserted. (3) When FL display of the main body changes from "READING" into "UPGRADE", cursor "UP" key ( ) of remote controller is pushed.
XV-SA600BK/XV-SA602SL 3.8 Flap adjustment of the pick-up guide shaft Assistance board 3.8.1 Tool list for adjustment (Connect to main board) Stud (four pieces set) Parts No. : JIGXVS40 XV-S40 MAIN CONNECT Extension cord set (two cord and two board) Parts No. : EXTXVS40CB Hex wrench for adjustment Off-the-shelf (1.3mm)
XV-SA600BK/XV-SA602SL 3.9 Attention when pick-up is exchanged Switch actuator (1) Flexible wire, pick-up spring, switch actuator, and lead spring are removed from an old pick-up (broken the one). Lead spring < Guide > Flexible wire, pick-up spring and switch actuator,lead...
The EEPROM is initialized. Refer to the initialization method. Opening picture check (Power ON) It should be display "JVC" Muting working The noise must not be had to the performance beginning when you push "PLAY" button or at ON/STANDBY. FL Display The mark and the logo, etc.
XV-SA600BK/XV-SA602SL 3.11Troubleshooting 3.11.1 Servo volume Press OPEN /CLOSE key Is tray Confirmation of tray drive circuit operation and circuit in surrounding correct? Is the traverse moving See "(3) Traverse movement error" along the innermost in "Check points for individual errors"...
XV-SA600BK/XV-SA602SL 3.12Check points for each error 3.12.1 Spindle start error (1) Defective spindle motor • Are there several ohms resistance between each pin of CN201 "5-6","6-7","5-7"? (The power supply is turned off and measured.) • Is the sign wave of about 100mVp-p in the voltage had from each terminal? [ CN201"9"(H1-),"10"(H1+),"11"(H2-),"12"(H2+),"13"(H3-),"14"(H3+) ]...
Page 24
XV-SA600BK/XV-SA602SL 3.12.3 Traverse movement NG (1) Defective traverse driver • Has the voltage come between terminal of CN101 "1" and "2" ? (2) Defective BTL driver (IC201) • Has the motor drive voltage gone out to IC201"17" or "18"? (3) Has the control signal come from servo IC or the microcomputer? •...
Page 25
XV-SA600BK/XV-SA602SL 3.12.9 Neither picture nor sound is output (1) It is not possible search • Has the tracking been turned on? • To "(5) Tracking ON NG" in "Check points for each error" when the tracking is not normal. • Is the feed operation normal? To "(3) traverse movement NG"...
XV-SA600BK/XV-SA602SL SECTION 4 Description of major ICs 4.1 74LCX373MTC-X(IC512,IC513) 4.1.2 Pin function 4.1.1 Pin layout Description Symbol Data inputs D0~D7 Latch enable input Output enable input 3-State latch outputs Q0~Q7 4.1.3 Truth table INPUTS OUTPUTS H = HIGH Voltage level...
XV-SA600BK/XV-SA602SL 4.2 BA5983FM-X (IC201) : 4CH Driver 4.2.1 Block diagram STAND BY Level Shift Level Shift Level Shift Level Shift STAND BY CH1/2/3 4.2.2 Pin function Pin No. Symbol Description Pin No. Symbol Description BIAS IN Input for Bias-amplifier VO4(-)
XV-SA600BK/XV-SA602SL 4.4 BA6664FM-X (IC251) : 3Phase Motor Driver 4.4.1 Pin layout 4.4.2 Block diagram DRIVER GAIN SWITCH GAIN CONTROL CURRENT SENSE AMP HALL AMP TOROUE SENSE AMP SHORT BRAKE CK Q BRAKE MODE Hall Bias...
Page 30
XV-SA600BK/XV-SA602SL 4.4.3 Pin function Pin No. Symbol Description Non connect Output 3 for spindle motor Non connect Output 2 for spindle motor Non connect Non connect Output 1 for spindle motor Connect to ground Positive input for hall input AMP 1...
XV-SA600BK/XV-SA602SL 4.7.3 Pin function (MN101C35DLJ 2/2) Pin No. Symbol Description Standby LED control signal output (RED) Standby LED control signal output (GREEN) Progressive LED control signal output (RED) Progressive LED control signal output (GREEN) DVD Audio LED control signal output (BLUE)
XV-SA600BK/XV-SA602SL 4.9 MN102L62GLF3 (IC401) : Unit CPU 4.9.1 Pin function Pin No. Symbol Function Pin No. Symbol Function WAIT Micon wait signal input SWUPDN Non connect Read enable MECHA_H/V Connect to ground SPMUTE Spindle muting output to IC251 DISCSET Mechanism state signal input...
XV-SA600BK/XV-SA602SL 4.10 MN103S26EGA (IC301) : Super optical disc controller 4.10.1 Terminal layout 4.10.2 Block diagram Host I/F DVD-ROM Analog MPEG I/F Formatter CD-PRE ATAPI High speed IO bus Instruction Servo I/O CGEN memory (core 1 I/O) (40KB) 32 bit CPU core...
Page 37
XV-SA600BK/XV-SA602SL 4.10.4 Pin function (MN103S28EGA : 2/4) Pin No. Symbol Description Read signal input from system controller 37~44 CPUDT7~0 System control data CLKOUT1 Non connect MMOD Test mode switch signal NRST System reset MSTPOL Master terminal polarity switch input SCLOCK...
Page 38
XV-SA600BK/XV-SA602SL 4.10.5 Pin function (MN103S28EGA : 3/4) Pin No. Symbol Description PLFLT1 Connect to capacitor 1 for PLL AVSS Connect to ground for analog circuit Connect to resistor for VREF reference current source VREFH Reference voltage input (2.2V) PLPG Non connect VHALF Reference voltage input (1.65V)
Page 39
XV-SA600BK/XV-SA602SL 4.10.6 Pin function (MN103S28EGA : 4/4) Pin No. Symbol Description Connect to ground VDD3 Power supply terminal for I/O (3.3V) HDD1 ATAPI host data 1 HDD13 ATAPI host data 13 HDD2 ATAPI host data 2 HDD12 ATAPI host data 12...
XV-SA600BK/XV-SA602SL 4.11 MN35505-X (IC703,IC813,IC823) : DAC 4.11.1 Terminal layout LRCK DVDD1 DVDD2 VCOF DVSS2 XOUT DVSS1 OUT1C OUT2C AVDD2 AVDD1 OUT1D OUT2D AVSS1 AVSS2 4.11.2 Pin function Pin No. Symbol Description Control signal for DAC Digital data input LRCK L and R clock for DAC...
XV-SA600BK/XV-SA602SL 4.12 NDV8611VWA(IC501):AV Decoder 4.12.1 Pin layout 4.12.2 Block diagram digital audio Video I/O port audio DAC NTSC Audio MPEG Video Audio output Video output digital audio Video SCART processor decoder processor encoder Serial serial XBUS port XBUS peripherals controller...
Page 42
XV-SA600BK/XV-SA602SL 4.12.4 Pin function (NDV8611VWA 2/4) Pin No. Symbol Description MA11 Non connect VSSio Connect to ground 32,33 MA12,13 SDRAM Address bus, reserved for terminal compatibility with 64Mb SDRAM Power supply terminal 1.8V SDRAM Primary bank chip select VDDio Power supply terminal 3.3V...
Page 43
XV-SA600BK/XV-SA602SL 4.12.5 Pin function (NDV8611VWA 3/4) Pin No. Symbol Description VDDio Power supply terminal 3.3V SSPOUT0 I/O SSP0 Data out or UART0 data-terminal-ready signal TXD0 I/O UART0 Serial data output to an external serial device RXD0 UART0 Serial data input from external serial device...
Page 44
XV-SA600BK/XV-SA602SL 4.12.6 Pin function (NDV8611VWA 4/4) Pin No. Symbol I/O Description SCLK External bus clock used for programmable host peripherals I/O Programmable WAIT/ACK/RDY control VSSio Connect to ground 163~168 AD13~8 I/O Multiplexed address / data bus terminal VDDio Power supply terminal 3.3V...
XV-SA600BK/XV-SA602SL 4.13 S-93C66AFJ-X (IC451,IC510) : EEPROM 4.13.1 Pin layout 4.13.2 Pin function Pin No. Symbol I/O Description Non connect Power supply terminal Chip select input Serial clock input Serial data input Serial data output Connect to ground Non connect 4.13.3 Block diagram...
XV-SA600BK/XV-SA602SL 4.15STR-G6551-F8 (IC901) : Switch regulator 4.15.1 Block diagram 4.15.2 Pin function Pin No. Symbol Description Function Drain terminal MOS FET drain Source terminal MOS FET source Ground terminal Ground Power supply terminal Input of power supply for control circuit O.C.P/F.B...
XV-SA600BK/XV-SA602SL SECTION 5 Glossary of term and abbreviations(for AV Decoder section) 3-dimension 1)audio/video 2)audio/visual alternating current ACLK audio serial-data (bit) clock multiplexed address / data bus analog-to-digital converter digital audio input address latch enable ANSI/SMPTE American National Standards Institute / Society of Motion Pictures and Television Engineers...
Page 49
XV-SA600BK/XV-SA602SL MCLK primary or master clock Megahertz MIPS Million Instructions Per Second MmCPU Mediamatics CPU (synonym for internal RISC CPU) Moving Picture Experts Group Layer-3 Audio (audio file format / extension) MPEG1 audio A digital audio format mainly used in video CDs. It is based on the moving picture expert group (MPEG1) format, a data compression technology.
Page 50
XV-SA600BK / XV-SA602SL VICTOR COMPANY OF JAPAN, LIMITED PERSONAL & MOBILE NETWORK BUSINESS UNIT 1644, Shimotsuruma, Yamato, Kanagawa 242-8514, Japan 200207 No.A0031...
Page 51
XV-SA600BK/XV-SA602SL In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( diode ( ) and ICP ( ) or identified by the " " mark nearby are critical for safety.
XV-SA600BK/XV-SA602SL PARTS LIST [XV-SA600BK / XV-SA602SL] * All printed circuit boards and its assemblies are not available as service parts. Area Suffix J ------------- U.S.A. C ---------- Canada - Contents - Exploded view of general assembly and parts list DVD Traverse mechanism assembly and parts list...
XV-SA600BK/XV-SA602SL DVD Traverse mechanism assembly and parts list Block No. M Grease EBS0006-013B PG-641 CFD-4007ZY2 12.0mm 0.2mm 65.2mm...
Page 72
XV-SA600BK/XV-SA602SL Parts list (DVD Traverse mechanism assembly) Block No. M2MM Item Parts number Parts name Q'ty Description Area LE20520-002A MECHA BASE LE20516-001A SPINDLE BASE QYSDST2605M TAPPING SCREW LE30909-001A HOLDER QAR0165-001 FEED MOTOR LV41510-001A FEED GEAR QYSPSPU2040M SCREW LV41512-001A FEED GEAR...
XV-SA600BK/XV-SA602SL DVD Loading mechanism assembly and parts list Block No. M Grease UD-24H2 EM-30L CFD-4007ZY2...
Page 74
XV-SA600BK/XV-SA602SL Parts list (DVD Loading mechanism assembly) Block No. M3MM Item Parts number Parts name Q'ty Description Area LV10454-007A LOADING BASE QAR0164-001 MOTOR LV42087-001A MOTOR PULLEY QYSPSPU1730Z SCREW VKZ4777-003 MINI SCREW LV42209-001A BELT LV42084-002A PULLEYGEAR LV42085-002A MIDDLE GEAR LV42086-001A IDLE GEAR...
XV-SA600BK/XV-SA602SL Block No. 01 Electrical parts list (Servo control board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area C 105 NEA70JM-476X E.CAPACITOR C 315 NCB31HK-471X C CAPACITOR C 106 NEA70JM-476X E.CAPACITOR C 316 NCB31HK-271X...
Page 76
XV-SA600BK/XV-SA602SL Block No. 01 Electrical parts list (Servo control board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area C 540 NCB31CK-104X C CAPACITOR K 101 NQR0007-002X FERRITE BEADS C 541 NCB31CK-104X C CAPACITOR K 301...
Page 77
XV-SA600BK/XV-SA602SL Block No. 01 Electrical parts list (Servo control board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area R 110 NRSA63J-333X MG RESISTOR R 329 NRSA63J-473X MG RESISTOR R 111 NRVA63D-243X RES. C.M R 332...
Page 78
XV-SA600BK/XV-SA602SL Electrical parts list (Servo control board) Block No. 01 Item Parts number Parts name Remarks Area R 801 NRSA63J-123X MG RESISTOR R 802 NRSA63J-223X MG RESISTOR R 803 NRSA63J-122X MG RESISTOR R 804 NRSA63J-821X MG RESISTOR R 805 NRSA63J-242X...
Page 79
XV-SA600BK/XV-SA602SL Block No. 02 Electrical parts list (Main board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area BK 1 LE20539-001A FL HOLDER C 837 NCS31HJ-101X C.CAPA. C.M QEKC1HM-475Z E CAPACITOR 4.7MF 20% 50V C 838 NCS31HJ-101X C.CAPA.
Page 80
XV-SA600BK/XV-SA602SL Block No. 02 Electrical parts list (Main board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area D 904 F1T4-T2 FR DIODE Q 14 KRA102S-X DIGITAL.TR D 905 F1T4-T2 FR DIODE Q 15 KRC107S-X DIGITAL.TR...
Page 81
XV-SA600BK/XV-SA602SL Block No. 02 Electrical parts list (Main board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area R 746 QRA14CF-3301Y MF RESISTOR 33 1/4W R 961 NRSA63J-681X MG RESISTOR R 747 NRSA63J-362X MG RESISTOR...
Page 82
XV-SA600BK/XV-SA602SL Block No. 03 Electrical parts list (Surround audio board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area BK811 E409182-001SM GRAND TERMINAL J 811 QNN0461-001 PIN JACK C 838 QFLC1HJ-102Z M CAPACITOR 1000PF 5% 50V...
Page 83
XV-SA600BK/XV-SA602SL Electrical parts list (Surround audio board) Block No. 03 Item Parts number Parts name Remarks Area R 928 QRE141J-561Y C RESISTOR 560 5% 1/4W R 929 QRE141J-273Y C RESISTOR 27K 5% 1/4W R 930 QRE141J-273Y C RESISTOR 27K 5% 1/4W...
--------- BATTERY A 12 QPC02504015P POLY BAG A 13 BT-52006-1 WARRANTY CARD 60c,62c A 14 BT-20071B JVC CENTER LIST Extention of area column 60j : XV-SA600BK ver.J 60c : XV-SA600BK ver.C 62j : XV-SA602SL ver.J 62c : XV-SA602SL ver.C 3-18...