Advertisement
D24
5.
SUB(BAY) Circuit Board
5-1
Remove the bottom assembly. (See procedure 2.)
5-2
Remove the power supply assembly. (See procedure 4-7.)
5-3
Remove the five (5) screws marked [440]. The front
assembly can then be removed. (Fig.7)
5-4
Remove the eight (8) screws marked [50]. The SUB(BAY)
circuit board can then be removed. (Fig.7)
[440]
[440]
[50]
Front assembly
6.
FP1/5, FP2/5, FP3/5, FP4/5, FP5/5 and
SUB(PANEL) Circuit Boards
6-1
Remove the top cover. (See procedure 1.)
6-2
Remove the bottom assembly. (See procedure 2.)
6-3
Remove the front assembly. (See procedure 5-3.)
6-4
FP1/5 Circuit Board: Remove the two (2) screws marked
[250B]. The front panel can then be removed. (Fig.8)
Remove the three (3) screws marked [140]. The FP1/5
circuit board can then be removed. (Fig.8)
FP2/5 Circuit Board: Remove the front panel and the
6-5
FP1/5 circuit board. (See procedure 6-4.)
Remove the three (3) screws marked [120]. The FP2/5
circuit board can then be removed. (Fig.8)
FP3/5 Circuit Board: Remove the front panel. (See
6-6
procedure 6-4.)
Remove the four (4) screws marked [180]. The sub panel
can then be removed. (Fig.8)
Remove the four (4) screws marked [170]. The FP3/5
circuit board can then be removed. (Fig.8)
6-7
FP4/5 Circuit Board: Remove the front panel. (See
procedure 6-4.)
Remove the knob, and remove the two (2) nuts marked
[70]. The FP4/5 circuit board can then be removed. (Fig.8)
17
Bottom Side
[440]
Top Side
SUB(BAY)
[50]
[50]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[440]
[440]: Bind Head Tapping Screw-B 4.0X8 MFZN2BL (VC688800)
(Fig. 7)
Advertisement
