Advertisement
6-8
FP5/5 Circuit Board: Remove the front panel. (See
procedure 6-4.)
Remove the power switch knob, and remove the two (2)
screws marked [60B]. The FP5/5 circuit board can then be
removed. (Fig.8)
SUB(PANEL) Circuit Board: Remove the two (2) screws
6-9
marked [200B]. The SUB(PANEL) circuit board can then
be removed. (Fig.8)
[60B]: Bind Head Screw 3.0X12 MFZN2BL (VP156600)
[120]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[140]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[170]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[180]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[200B]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[250B]: Bind Head Tapping Screw-B 4.0X8 MFZN2BL (VC688800)
7.
Recorder Unit
7-1
Remove the top cover. (See procedure 1.)
7-2
Remove the four (4) screws marked [10g]. The recorder
unit can then be removed by sliding backward. (Fig.9)
7-3
Remove the four (4) screws marked [10f]. The two angles
can then be removed. (Fig.10)
<Top View>
[10g]: Bind Head Tapping Screw-B A3.0X8 MFZN2BL (VP157000)
Recorder unit
[10g]
(Fig. 9)
FP
2/5
[120]
[120]
[180]
[140]
FP
1/5
Sub panel
[140]
[250B]
Front panel
[250B]
(Fig. 8)
[10f]
[10f]: Bind Head Screw A3.0X6 MFZN2BL (VP156600)
SUB(PANEL)
[200B]
FP
[60B]
[70]
[180]
Knob
Power swith knob
[170]
FP
3/5
Angle
Recorder unit
(Fig. 10)
D24
5/5
FP
4/5
Angle
[10f]
18
Advertisement
