Toshiba BMS-SM1280HTLE Installation Manual page 14

Smart Manager
<DS24>
<1> to <3> Timer input switching
These bits switch operation when the weekly timer has changed.
• Use (1) and (2) only in the remote control mode.
• When the control group selection is used, "All ON," "All OFF" and
"all indoor units" mean those within the set group range.
Central controller operation
Timer
(1) All ON
(2) No change
(3)
(4)
All indoor units are locally
controllable.
(5)
(6)
CENTRAL 1:Disables operation start/stop using the remote controller.
CENTRAL 2:Disables operation start/stop, operation mode switching, and temperature setting using the remote
controller.
<4> Always OFF
Always set this bit to OFF.
<5> Control group Selection line
OFF: LINE 1
ON: LINE 2
* Set a line number for which the control group selection is used.
<6> Control group selection enable
OFF: Normal mode
ON: Control group selection
Set this bit to ON when the control group selection is used.
* To use the control group selection, set DS23-<2> to <5> and DS24-<5>
to <6>. For details, see "7.Mode Setting for Smart Manager".
<7> Buzzer
OFF: With buzzer sound
ON: Without buzzer sound
<8> indication
OFF: Displayed
ON: Not displayed
-EN
14
AMP Air Conditioning
→
OFF ON
Timer
All OFF
All OFF
All indoor units CENTRAL 1
All OFF and all indoor units to
be CENTRAL 1
All indoor units CENTRAL 2
All OFF and all indoor units to
be CENTRAL 2
Switch No.
<1>
→
ON OFF
OFF
ON
OFF
ON
OFF
ON
www.ampair.co.uk | sales@ampair.co.uk
Installation Manual
Factory setting: All OFF
DS24
1 2 3 4 5 6 7 8
ON
OFF
<2> <3>
OFF OFF
OFF OFF
ON OFF
ON OFF
OFF ON
OFF ON