Siemens SIMATIC ET 200SP Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. I/O Systems
  5. SIMATIC ET 200SP
  6. Manual
Siemens SIMATIC ET 200SP Manual

Siemens SIMATIC ET 200SP Manual

Ha digital output module dq 16x24vdc/0.5a
Hide thumbs Also See for SIMATIC ET 200SP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Function Manual, Manual
SIMATIC
ET 200SP HA
Digital output module DQ
16x24VDC/0.5A
(6DL1132-6BH00-0PH1)
Manual
05/2017
A5E39265993-AA
Security information
Product overview
Wiring
Parameters
Displays and interrupts
Technical specifications
Drivers, parameters,
diagnostics messages and
address space
1
2
3
4
5
6
A

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC ET 200SP

Summary of Contents for Siemens SIMATIC ET 200SP

  • Page 1 Security information Product overview Wiring SIMATIC Parameters ET 200SP HA Digital output module DQ Displays and interrupts 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Technical specifications Manual Drivers, parameters, diagnostics messages and address space 05/2017 A5E39265993-AA...
  • Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    Table of contents Security information............................5 Product overview............................7 Properties of the I/O module DQ 16x24VDC/0.5A HA.............7 Wiring................................9 Terminal assignment of the I/O module DQ 16x24VDC/0.5A HA..........9 Schematic circuit diagram......................11 Parameters..............................13 Parameters of the I/O module DQ 16x24VDC/0.5A HA............13 Module/channel parameters....................14 Explanation of the module/channel parameters..............15 Displays and interrupts..........................17 Status and error displays of the I/O module DQ 16x24VDC/0.5A HA........17 Interrupts..........................20...
  • Page 4 Table of contents Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

  • Page 5: Security Information

    In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks.
  • Page 6 Security information Conventions Please also observe notes marked as follows: Note A note contains important information on the product described in the documentation, on the handling of the product or on the section of the documentation to which particular attention should be paid.

  • Page 7: Product Overview

    Product overview Properties of the I/O module DQ 16x24VDC/0.5A HA View of the module 16 x2 4V DC /0 ,5 DI AG M T 1 DQ .0 + DQ .1+ 3 DQ .2+ DQ .3 + 5 DQ .4 + DQ .5 + 7 DQ .6 + DQ .7+...
  • Page 8 Product overview 2.1 Properties of the I/O module DQ 16x24VDC/0.5A HA Properties The I/O module has the following technical properties: ● 16 digital outputs with the following properties that can be individually configured for each channel – Configurable diagnostics – Configurable substitute values ●...

  • Page 9: Wiring

    Wiring Terminal assignment of the I/O module DQ 16x24VDC/0.5A HA Terminal blocks You can operate the I/O module with the following terminal blocks: ● 6DL1193-6TP00-0DH1, light ● 6DL1193-6TP00-0BH1, dark ● 6DL1193-6TP00-0DM1, light, for redundant configuration ● 6DL1193-6TP00-0BM1, dark, for redundant configuration The terminal block is not included in the scope of delivery of the I/O module and must be ordered separately.
  • Page 10 Wiring 3.1 Terminal assignment of the I/O module DQ 16x24VDC/0.5A HA General pin assignment Table 3-1 Pin assignment of the DQ 16×24VDC/0.5A HA Terminal Assignment Terminal Assignment Description DQ a/DQ.0+ DQ a/DQ.1+ DQ a /DQ.n+: Output signal, channel n (0…7) DQ a/DQ.2+ DQ a/DQ.3+ DQ b /DQ.n+: Output signal, channel n (8…15)

  • Page 11: Schematic Circuit Diagram

    Wiring 3.2 Schematic circuit diagram Schematic circuit diagram The following figure shows the block diagram of the DQ 16x24VDC/0.5A HA. Figure 3-1 Block diagram DQ 16×24VDC/0.5A HA Firmware update The supply voltage L+ must be applied to the I/O module at the start of a firmware update and during the firmware update.
  • Page 12 Wiring 3.2 Schematic circuit diagram Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

  • Page 13: Parameters

    Parameters Parameters of the I/O module DQ 16x24VDC/0.5A HA Configuration You configure the I/O module with PCS 7 V9.0 or higher. Parameters You define the functioning of the I/O module via parameters. See also Parameter assignment and structure of the module/channel parameters (Page 28) Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

  • Page 14: Module/Channel Parameters

    Parameters 4.2 Module/channel parameters Module/channel parameters Parameters of the DQ 16x24VDC/0.5A HA You have the following setting options: Table 4-1 Parameters and their default settings Parameter Value range Default Parameter re‐ Efficiency range assignment in Diagnostics, Enabled Module ● Enabled Missing supply voltage L+ ●...

  • Page 15: Explanation Of The Module/Channel Parameters

    Parameters 4.3 Explanation of the module/channel parameters Explanation of the module/channel parameters Diagnostics, Missing supply voltage L+ Enabling of the diagnostics for missing or insufficient supply voltage L+. IO redundancy You can configure two identical modules redundantly. To do so, plug both modules into a redundant terminal block side by side.
  • Page 16 Parameters 4.3 Explanation of the module/channel parameters Substitute value The substitute value is output by the module at CPU STOP if you set the "Reaction to CPU STOP" parameter to "Substitute value". Potential group A potential group consists of a group of directly adjacent I/O modules within an ET 200SP station HA, which are supplied via a common supply voltage.

  • Page 17: Displays And Interrupts

    Displays and interrupts Status and error displays of the I/O module DQ 16x24VDC/0.5A HA LED displays The following figure shows the LED displays of the I/O module: 16x24VDC/0,5A DIAG MT 1 DQ.0 DQ.1 3 DQ.2 DQ.3 5 DQ.4 DQ.5 7 DQ.6 DQ.7 9 DQ.0 DQ.1...
  • Page 18 Displays and interrupts 5.1 Status and error displays of the I/O module DQ 16x24VDC/0.5A HA DIAG LED Table 5-1 Diagnostics display of the DIAG LED DIAG LED Meaning The supply voltage of the ET 200SP HA is disrupted or switched off. Module is not configured.
  • Page 19 Displays and interrupts 5.1 Status and error displays of the I/O module DQ 16x24VDC/0.5A HA PWR LED Table 5-4 Status display of the PWR LED PWR LED Meaning Supply voltage L+ missing Supply voltage L+ present Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

  • Page 20: Interrupts

    Displays and interrupts 5.2 Interrupts Interrupts The I/O module supports diagnostics interrupts and maintenance messages. Diagnostics interrupts The I/O module generates a diagnostics interrupt at the following events: ● Short-circuit to L+ ● Short-circuit to ground ● Wire break ● Supply voltage missing ●...

  • Page 21: Technical Specifications

    Technical specifications Technical specifications of the DQ 16x24VDC/0.5A HA Article number 6DL1132-6BH00-0PH1 General information Product type designation DQ 16x24VDC/0.5A HA HW functional status FS01 Firmware version V1.0 ● FW update possible Usable terminal block TB type H1 and M1 Color code for module-specific color identifica‐ CC02 tion plate Product function...
  • Page 22 Technical specifications Article number 6DL1132-6BH00-0PH1 Digital outputs Number of digital outputs Current-sinking Current-sourcing Short-circuit protection Yes; Ensure sufficient low-resistance cable routing to the sensor/actuator in order to attain the re‐ sponse threshold. Depending on the cable cross- section used, there may be constraints regarding the usable length of cable.
  • Page 23 Technical specifications Article number 6DL1132-6BH00-0PH1 – up to 50 °C, max. – up to 60 °C, max. 5.5 A – up to 70 °C, max. vertical installation – up to 30 °C, max. 6.33 A – up to 40 °C, max. 4.67 A –...
  • Page 24 Technical specifications Article number 6DL1132-6BH00-0PH1 Height 115 mm Depth 138 mm Weights Weight, approx. 137 g Derating curve The following figure shows the load current derating with horizontal and vertical mounting positions. 9.00 8.00 Total current I / A Horizontal mounting position 7.00 Total current I / A 6.00...

  • Page 25: Drivers, Parameters, Diagnostics Messages And Address Space

    Drivers, parameters, diagnostics messages and address space Concept of the driver and diagnostics blocks Use outside the PCS 7 environment The following information of the appendix is relevant for use of the ET 200SP HA outside the PCS 7 environment. If you do not plan to operate outside the PCS 7 environment, you do not need the information in the appendix.
  • Page 26 A.1 Concept of the driver and diagnostics blocks This block concept supports all modules from the list of approved modules. When new Siemens or non-Siemens module types are integrated, the meta-knowledge for the driver generator can be extended by additional XML files (object and action lists).

  • Page 27: Parameter Assignment

    Drivers, parameters, diagnostics messages and address space A.2 Parameter assignment Parameter assignment Parameter assignment in the user program You can reconfigure individual channels of the module in RUN without this having an effect on the other channels. Changing parameters in RUN The parameters are transferred to the module with the "WRREC"...

  • Page 28: Parameter Assignment And Structure Of The Module/Channel Parameters

    Drivers, parameters, diagnostics messages and address space A.3 Parameter assignment and structure of the module/channel parameters Parameter assignment and structure of the module/channel parameters Structure of data record 128 Data record 128 has a length of 44 bytes. It contains the channel parameters of the 16 channels. Figure A-1 Structure of data record 128 Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1)
  • Page 29 Drivers, parameters, diagnostics messages and address space A.3 Parameter assignment and structure of the module/channel parameters Header information and module parameters The following figure shows the configuration of the header information and module parameters. Figure A-2 Header information and module parameters of data record 128 Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...
  • Page 30 Drivers, parameters, diagnostics messages and address space A.3 Parameter assignment and structure of the module/channel parameters Channel parameters Each channel parameter block contains the cable parameters for the digital output (4 bytes). The following figure shows the configuration of the channel parameters for channels 0 to 15. x = 12 + (channel number * 2);...

  • Page 31: Diagnostics Messages And Maintenance Events

    Drivers, parameters, diagnostics messages and address space A.4 Diagnostics messages and maintenance events Diagnostics messages and maintenance events Diagnostics messages A diagnostics message is generated for each diagnostics event and the DIAG LED on the DQ 16x24VDC/0.5A HA flashes red or the MT LED lights up yellow. In addition, channel-specific channel diagnostics are displayed through the corresponding channel error/status LEDs.
  • Page 32 Drivers, parameters, diagnostics messages and address space A.4 Diagnostics messages and maintenance events Diagnostics Error code Assign‐ Meaning Remedy message ment Shutdown on Module The output disable switch was activated Pull module button activa‐ tion Inconsistent Module Errors in the redundancy parameters sent to the Check the parameter assign‐...

  • Page 33: Address Space

    Drivers, parameters, diagnostics messages and address space A.5 Address space Address space Abbreviations ● "IB" stands for input byte, that is, the module start address in the input area ● "QB" stands for output byte, that is the module start address in the output area ●...
  • Page 34 Drivers, parameters, diagnostics messages and address space A.5 Address space Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

  • Page 35: Index

    Index Channel fault LED, 17 Technology parameters, 28 Channel parameters, 14, 28 terminal block, 9 Channel status LED, 17 Conventions, 6 Value status Evaluating, 33 Data record 128, 28 Header information, 29 DIAG LED, 18 Diagnostics interrupt, 20 Documentation Range of validity, 5 DQ 16x24VDC/0.5A HA Accessories, 8 Channel parameters, 14...
  • Page 36 Index Digital output module DQ 16x24VDC/0.5A (6DL1132-6BH00-0PH1) Manual, 05/2017, A5E39265993-AA...

Table of Contents