Setting The Dhw; Dhw On/Off; Setting The Dhw Temperature; Control Unit Setting - Bosch Condens 2000F30 Regular boiler Installation, Commissioning And Servicing Instruction Manual

Floor-standing gas-fired condensing appliance
Table of Contents

Advertisement

32 | Operating the appliance
9.5

Setting the DHW

9.5.1

DHW on/off

▶ Press the
button repeatedly until the
flashing
is displayed.
Fig. 42 DHW display
▶ Press + or – button to set the desired hot water use:
= DHW mode
+ Eco = Eco mode
= DHW mode off
No hot water will be available if the DHW mode has been
set to off.
▶ Press ok to save the setting.
The tick symbol
is displayed briefly to confirm that the setting
has been saved.
Fig. 43 Eco mode setting
The burner symbol
is displayed when there is a DHW demand.
DHW or Eco mode?
• DHW mode
If the temperature in the hot water tank falls by more than 5 K (° C)
below the set temperature, the hot water tank is heated back up to
the set temperature. The control then switches back into heating
mode.
• Eco mode
If the temperature in the hot water tank falls by more than 10 K (° C)
below the set temperature, the hot water tank is heated back up to
the set temperature. The control then switches back into heating
mode.
6 720 ... ... (YYYY/MM)
9.5.2

Setting the DHW temperature

▶ DHW or Eco mode, ( section 9.5).
– Press the
symbol or the
The set DHW temperature flashes.
6 720 619 605-18.1O
Fig. 44
▶ Press the + or – button, to select the desired DHW temperature, set
between 40 and 60 °C.
▶ Press the ok button to save the setting.
The tick symbol
has been saved.
Fig. 45
9.6

Control unit setting

Some of the features described in this section change when connected
6 720 619 605-19.1O
to another control unit (e.g. FW100), some of those features are:
• communication with the control unit and base controller
• setting parameters
button.
is displayed briefly, to confirm that the setting
It is recommend that the temperature is set to at least
55 °C to prevent bacterial contamination, such as
Legionella.
Control unit instructions
The instructions will show you how to:
▶ set the mode and the heating curve using feedback
from an outside temperature sensor.
▶ set the room temperature.
▶ heat economically and save energy.
6 720 619 605-20.1O
6 720 619 605-19.1O
Product Name

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents