Customize The Imager Behavior - Motorola RS507 Quick Reference Manual

Quick Reference Guide

Customize the Imager Behavior

The Imager behavior can be configured by scanning custom barcode tables. The
following table provides examples of configurable Imager features.
Feature
Beep on
reconnection
attempt
Motion
sensing
Proximity
sensing
Proximity
distance
Low battery
indication
Bluetooth
auto connect
Description
When this parameter is enabled, the
Imager emits a low/high beep when
Bluetooth link is reconnected.
When this parameter is enabled, the
Imager automatically scans when motion
stops in front of the Imager and a barcode
is placed within the depth of field of the
Imager.
When this parameter is enabled, the
Imager automatically scans when sensing
proximity to an object and a barcode is
placed within the depth of field of the
Imager.
When using proximity sensing, you can set
proximity distance to Short, Mid or Long.
When this parameter is enabled, the
Imager flashes red every 15 seconds when
battery power is low.
The Imager automatically tries to reconnect
to a remote device when a disconnection
occurs that is due to the radio losing
communication. This can happen if the
Imager goes out of the mobile computer
range.
The following auto connect options are
available: "None", "On power up", "Back in
Bluetooth range", "On power up & back in
Bluetooth range".
Default Setting
The beep on
reconnection
attempt feature is
disabled by default.
Motion sensing is
set by default to on
for triggerless
models and off for
triggered models.
Proximity sensing is
set by default to on
for trigger less
models and off for
triggered models.
Proximity distance
is set to Long by
default.
Low battery
indication is
disabled by default.
Bluetooth auto
connect is set to
"Back in Bluetooth
range" by default.
15