Change Trigger Position - Motorola RS507 Quick Reference Manual

Quick Reference Guide

Change Trigger Position

The Trigger Assembly of the Imager rotates to provide left-hand or right-hand use.
Remove the Fingers Strap from the Strap Buckle.
1.
From bottom of Imager, Hold and pull the Comfort Pad out of the Barcode
2.
Imager.
Fingers Strap
Trigger
Assembly
Determine whether the Imager is used on the right or left hand and rotate the
3.
Trigger Assembly.
CAUTION The Trigger Assembly only rotates 180° around the back of the
Rotate the Trigger Assembly so that the Scan Trigger is positioned next to the
4.
thumb when the Imager is placed on the index and middle fingers.
Position the Comfort Pad onto the Imager.
5.
Press the Comfort Pad onto the Imager. When properly installed, the Comfort
6.
Pad "locks" into place.
Insert the Fingers Strap into the Strap Buckle
7.
scan assembly. Do not rotate the Trigger Assembly past the
designed stops
Comfort Pad
Strap Buckle
Trigger Assembly
7