Pairing hearing instruments with easyTek
Your hearing instruments have to be paired once with
easyTek. After that, the connection is automatically
established when your hearing instruments and easyTek
are turned on.
Preconditions:
Both hearing instruments are turned off (the battery
■
compartments are open) and within operating
distance.
easyTek is turned off.
■
Neckloop is closed, easyTek is worn around the neck.
■
Pairing:
Press
until the green LED turns on
u
takes approximately 2 seconds.
easyTek searches for hearing instruments nearby
.
Turn on the hearing instruments while the green LED is
u
flashing
If you are wearing two hearing instruments, both
instruments must be turned on.
: Close the battery compartment.
DRAFT
. This
Getting started
11