Pairing may take several seconds. The green LED indicates
the pairing status:
Pairing status
flashing, then on for 5 seconds, then off
➧
Pairing is finished. An acoustic signal is played. You can
now use easyTek.
flashing for 10 minutes, then off
➧
Hearing instruments could not be paired. Refer to section
"Troubleshooting".
When pairing is finished, easyTek is ready...
... for remote control functions. Refer to section
■
"Remote control functions".
... for pairing Bluetooth devices as long as the blue LED
■
is flashing
devices".
If you want to pair Bluetooth devices not now but later
on, press
12
Getting started
. Refer to section "Pairing Bluetooth
.
DRAFT