Importing A Public Key From A Public Key File - HP 12500 Series Configuration Manual

Key Module: 1024
=====================================
Key Code:
30819F300D06092A864886F70D010101050003818D0030818902818100D90003FA95F5A44A2A2CD3F
814F
9854C4421B57CAC64CFFE4782A87B0360B600497D87162D1F398E6E5E51E5E353B3A9AB16C9E766BD
995C
669A784AD597D0FB3AA9F7202C507072B19C3C50A0D7AD3994E14ABC62DB125035EA326470034DC07
8B2B
AA3BC3BCA80AAB5EE01986BD1EF64B42F17CCAE4A77F1EF999B2BF9C4A10203010001
The output shows that the host public key of Switch A saved on Switch B is consistent with the one
created on Switch A.

Importing a public key from a public key file

Network requirements
As shown in
peer device) through a digital signature. Before configuring authentication parameters on Switch B,
configure the public key of Switch A on Switch B.
• Configure Switch B to use the asymmetric key algorithm of RSA.
Import the host public key of Switch A from the public key file to Switch B.
•
Figure 59 Network diagram
Configuration procedure
Create key pairs on Switch A and export the host public key:
1.
# Create local RSA key pairs on Switch A, setting the modulus length to the default, 1024 bits.
<SwitchA> system-view
[SwitchA] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
++++++
++++++
++++++++
++++++++
# Display the public keys of the local RSA key pairs.
[SwitchA] display public-key local rsa public
=====================================================
Time of Key pair created: 09:50:06
Figure 59, to prevent illegal access, Switch B (the local device) authenticates Switch A (the
2007/08/07
162