Configuration Prerequisites; 802.1X Configuration Task List; Enabling 802.1X - HP 12500 Series Configuration Manual

Configuration prerequisites

Configure an ISP domain and AAA scheme (local or RADIUS authentication) for 802.1X users.
•
If RADIUS authentication is used, create user accounts on the RADIUS server.
•
• If local authentication is used, create local user accounts on the access device and set the service
type to lan-access.

802.1X configuration task list

Task

Enabling 802.1X

Enabling EAP relay or EAP termination
Setting the port authorization state
Specifying an access control method
Setting the maximum number of concurrent 802.1X users on a port
Setting the maximum number of authentication request attempts
Setting the 802.1X authentication timeout timers
Configuring the online user handshake function
Configuring the authentication trigger function
Specifying a mandatory authentication domain on a port
Configuring the quiet timer
Enabling the periodic online user re-authentication function
Configuring an 802.1X guest VLAN
Configuring an 802.1X Auth-Fail VLAN
Specifying supported domain name delimiters
Enabling 802.1X
NOTE:
802.1X is mutually exclusive with link aggregation group configuration on a port.
To enable 802.1X on a port:
Step
1. Enter system view.
2. Enable 802.1X globally.
Command
system-view
dot1x
79
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Remarks
N/A
By default, 802.1X is disabled
globally.