3155/3155i (RM-41), 3152 (RM-61)
RF Description and Troubleshooting
12. Click Read Phone to update the values.
PCS Setup
Use the following procedures to prepare for PCS Tx troubleshooting using Phoenix.
1. Connect an RF test connector to a call box.
2. Connect the mobile terminal to the PC via a test jig. (The bottom connector is a
USB port.)
3. Connect a power supply to the mobile terminal.
4. Open the Troubleshooting menu, and point to Phone Control.
The Phone Control dialog box appears. (See
5. Click the LOCAL button in the Phone State area to put the mobile terminal into
Local Mode.
6. Open the Troubleshooting menu, point to RF, and click RF Main Mode.
The RF Main Mode dialog box appears. (See
Page 18
Figure 13: RF PDM Control dialog box for Cell band
©2005 Nokia Corporation
Figure 8
on page 14.)
Figure 11
on page 16.)
Company Confidential
ISSUE 1 07/2005