1) When removing the left circle cover [1], turn it in the direction of the arrow.
2) When removing the right circle cover [1], turn it in the direction of the arrow.
Attaching the left/right circle cover
1) When attacing the left circle cover, fit it in place with the three hooks [1] up and turn it toward the rear side of the printer. when attacing the right circle cover,
fit it in place with the two hooks [2] up and turn it toward the rear side of the printer.
b) Tank cover
Removing the left cover
1) When removing the tank cover[4], remove the left circle cover and then open the top cover.
2) Open the tank cover, remove the three screws[1], and then release the three hooks[2] while opening the hook[3] outward.