Turning On The Power; Turning Off The Power - Pioneer Elite PRO-1140HD Operating Instructions Manual

Basic Operations
06
Basic Operations

Turning on the power

(from Standby)
1
Press a POWER on the Plasma Display if the POWER ON
and STANDBY indicators are off.
• The STANDBY indicator on the Plasma Display lights up
red.
2
Press TV a on the remote control unit or STANDBY/ON
on the Plasma Display to turn the system on.
• The POWER ON indicator on the Plasma Display lights
up blue.

Turning off the power

(to Standby)
1
Press TV a on the remote control unit or STANDBY/ON
on the Plasma Display.
• The system enters the standby mode and the image on
the screen disappears.
• The STANDBY indicator lights up red.
• This allows the system to automatically receive digital TV
program information while in Standby.
NOTE
• If you are not going to use this system for a long period of
time, unplug the power cord from the power outlet.
Plasma Display status indicators
The table below shows the operational status of the Plasma
Display Panel. Panel indicators reflect the current status of the
Plasma Display.
Indicator
Status
POWER ON STANDBY
For other than the above, see "Troubleshooting"on page 103.
CAUTION
• If the POWER ON and STANDBY indicators are off, the
system cannot be powered ON. Pressing the TV a or
STANDBY/ON button has no effect. Press POWER then wait
for the Standby indicator to light (red).
• The Plasma Display System consumes some power as long
as the plug is inserted into an outlet.
26
En
System Status
The Plasma Display has been unplugged
or the Plasma Display is off.
Power to the system is on.
The system is in Standby.
Plasma Display
(PRO-1540HD)
POWER button
POWER ON indicator
(PRO-1140HD)
POWER button
POWER ON indicator
STANDBY indicator
(PRO-940HD)
Viewed from below of the display (left).
STANDBY/ON
button
(Right side view)
STANDBY indicator
POWER ON
indicator
STANDBY
indicator
POWER button