Installing An Ap-7161; Required Tools; Mounting Bracket Options - Motorola AP-7161 Installation Manual

14

Installing an AP-7161

The following guidelines and procedures should be observed when installing an AP-7161:

Required Tools

The following is a list of the minimal tool set required to install an AP-7161:
• 8 mm socket and driver
• Torque wrench or ratchet with 10mm, 1/2 inch and 3/4 inch sockets.
• Adjustable wrench

Mounting Bracket Options

The mounting bracket kit and extension mounting hardware for the AP-7161 support several options for installation.
The AP-7161 mounting bracket kit contains:
Description
Mounting bracket section 1
Mounting bracket section 2
Mounting bracket section 3
Serrated hex flanged screw, M6 x1.0 x 12
Hex nut, 1/2inch - 13 thread
Hex head bolt, 1/2 inch - 13 thread x 3/4 inch
The three individual sections for the AP-7161 mounting bracket kit (P/N SKJC120210-001, -002 and -003) can be adjusted to
rotate (plus or minus 15 degrees) and tilt (up to 45 degrees) during installation to orient the unit for optimum positioning.
Part Number Quantity
SKJC120210-001
SKJC120210-002
SKJC120210-003
SKJC120210-004
SKJC120210-006
SKJC120210-007
AP-7161 Access Point Installation Guide
1
1
1
8
4
2