Canon CXDI-50C Service Manual page 42

3.3 Network setting stored in the CXDI-50G/50C sensor
The factory default setting is shown in the table below.
This setting is not necessary unless you have changed the setting.
Item to be set
Sensor IP address
Subnet mask
Host IP address
Port number for command
Port number for data
If you change the setting, refer to "Tool Software Operation Manual for Ethernet" → "Imaging
Part IP Address Setting".
2. Installation Manual
192.168.100.11
255.255.255.0
192.168.100.10
12121
12122
- 25 -
Factory default value