Front Panel Functions - Pioneer Elite PRO 510HD Operating Instructions Manual

FRONT PANEL FUNCTIONS

A flip-down door conceals the control panel. Push gently and
release, to open the door. To close the door, lift it back up into
place.
NOTE:
If you accidentally pull the door, it may not shut properly. Push
the door back in to shut it.
P U S
H
1
STANDBY/ON STANDBY/ON
20
<ARB1527>
In some cases, the door may only open slightly when pushed.
In such cases, open the door with your finger as shown in the
figure at left.
2 3
MAIN POWER
DTV
DPO
1 POWER STANDBY/ON indicator
red: STANDBY
green: ON
2 DTV indicator
Lights when receiving a digital television broadcast.
If the SH-D09 digital tuner (sold separately) has been connected,
the DTV indicator may still blink even when the power has
been turned off. (This is not a defect.)
3 DPO sensor
Sensor to detect the room brightness.
4 MAIN POWER switch
Press once to turn on the main power (STANDBY mode). Press
again to turn off the main power.
5 POWER button (STANDBY/ON)
Press once to turn on the Monitor. Press again to turn off the
Monitor.
6 INPUT SELECTOR button
Press to select your program source. Each press of the INPUT
SELECTOR changes the selection to the next source.
TV (DTV)
INPUT 4 INPUT 3
7 CHANNEL buttons
Press plus (+) or minus (–) to tune to a higher or lower channel.
Only the preset channels can be tuned in using these buttons.
4 5
STANDBY/ON
INPUT
POWER
SELECTOR
INPUT 1
INPUT 2
6 7 8
CHANNEL RETURN