Using The Component Video Jacks - Pioneer 7.1 VSX-AX2AV-S Operating Instructions Manual

Connecting your equipment
03
• For a second recorder, use the DVR/ VCR2 outputs.
3 If the device can output digital audio, connect an
1
optical-type digital audio output from the recorder to
the DIGITAL 2 (DVR/VCR1) input.
Use an optical cable for the connection.
• For a second recorder, use the DIGITAL 3 ( DVR/
VCR2) inputs.

Using the component video jacks

Component video should give superior picture quality
when compared to composite or S-video. You can also
take advantage of progressive scan video (if your source
and TV are both compatible), which delivers a very stable,
flicker-free picture. See the manuals that came with your
TV and source component to check whether they are
compatible with progressive-scan video.
VSX-AX4AVi
MULTI-ROOM
&SOURCE
/REC SEL
OUT1
ROOM3(ZONE3)
OUT2
S400
USB
AUDIO
IN
(AUDIO)
IN1
(SAT)
S400
IN2
(DVR/
VCR 1)
IN3
(DVR/
VCR 2)
IN4
(CD-R)
1–4
ASSIGNA-
BLE
1–2
IN1
(DVD/
LD)
IN2
(CD)
DIGITAL
2
1
Note
1 • In order to record, you must connect the analog audio cables (the digital connection is for playback only).
• If your video component doesn't have a digital audio output, you can skip this step.
2 If your recorder only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial digital audio cable. When
you set up the receiver you'll need to tell the receiver which input you connected the recorder to (see also The Input Setup menu on page 60).
14
En
2
ANTENNA
FM UNBAL 75Ω AM LOOP
MULTI-ROOM & SOURCE
MONITOR MULTI-ROOM & SOURCE
ROOM2(ZONE2) OUT
IN OUT ROOM2(ZONE2)
R
OUT
IR
12 V TRIGGER
DVD/
1 2
LD
IN1
IN
(DC OUT 12V TOTAL 50mA MAX)
ROOM2 MULTI-ROOM
& SOURCE
TV
MONITOR IN
IN2
(ZONE2) OUT
OUT
HDMI IN1
IN1(DVD/LD)
IN1 SAT
Y Y
IN2(TV)
IN
1–2
ASSIGNABLE
VIDEO1/
P P
B B
GAME1
IN
IN2
P P OUT
R R
DVR/
VCR 1
IN2 IN3 IN3
Y Y IN
OUT
P P OUT
B B
DVR/
VCR 2
P P IN
R R
R
S - VIDEO VIDEO
1–3
ASSIGNABLE
COMPONENT VIDEO VIDEO AUDIO
Y
P
B
P
R
COMPONENT
VIDEO
TV
Y
P
B
P
R
COMPONENT
DVD player
VIDEO
1 Connect the component video outputs of your
source to a set of ASSIGNABLE COMPONENT VIDEO
inputs.
Connect using a three-way component video cable.
• Since they are assignable, it doesn't matter which
component video inputs you use for which source.
After connecting everything, you'll need to assign the
component video inputs—see The Input Setup menu
on page 60.
2 Connect the COMPONENT VIDEO OUT jacks to the
component video inputs on your TV or monitor.
Use a three-way component video cable.
AUDIO
PHONO
IN
L
CD
IN
OUT
CD-R/
TAPE
IN
R L
FR FL
SUB W. CENTER
SUR-
ROUND
R L
R L
SURROUND
BACK
MULTI CH
IN
OUT
L
CONTROL