JVC UX-G300B Service Manual page 9

3.1.5 Removing the CD mechanism (See Fig.7 to 9)
(1) Disconnect the card wire from CD mechanism connected
to connector CN360 and
(See Fig.7)
(2) Disconnect the card wire from CD mechanism connected
to connector CN205 of the Power board. (See Fig.7)
(3) Remove the two screws F attaching the CD mechanism.
(See Fig.8)
(4) Disconnect the connector wire from USB jack board con-
nected to connector CN802
(See Fig.9)
CN362 of the Connection board.
of the CD servo control board.
CN205 CN362
Fig.7
Fig.8
CN802
Fig.9
CN360
F
(No.MB665<Rev.004>)1-9