Sr+ Control For Pioneer Plasma; Displays - Pioneer VSX-D814 Operating Instructions Manual

07 Setting up the receiver
Coaxial digital 1:
• Default setting: DVD
• Use
digital 1 input (DVD, TV, CD, CDR, DVR or
OFF).
Coaxial digital 2:
• Default setting: CD
• Use
digital 2 input (DVD, TV, CD, CDR, DVR or
OFF).
Optical digital 1:
• Default setting: TV
• Use or
1 input (DVD, TV, CD, CDR, DVR or OFF).
Optical digital 2
• Default setting: DVR
• Use or
2 input (DVD, TV, CD, CDR, DVR or OFF).
• You can't assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
automatically switches input 2 to OFF.

SR+ control for Pioneer plasma

displays

Make the following settings if you have
connected a Pioneer plasma display to this
receiver using an SR+ cable. Note that the
number of function settings available will
depend on the plasma display you've
connected.
See also Using this receiver with a Pioneer
plasma display on page 26 and Using the SR+
mode with a Pioneer plasma display on
page 51.
48
En
or to assign the coaxial
or to assign the coaxial
to assign the optical digital
to assign the optical digital
Control mode setting
This must be switched to SR+ ON to access
the settings below (default is SR+ OFF).
• SR+ OFF – Switches SR+ off (the receiver
and plasma display work independently)
• SR+ ON – Switches SR+ on (the receiver
sends control signals to the plasma
display)
Volume control setting
• VOL C OFF – The receiver does not control
the volume of the plasma display
• VOL C ON – When the receiver is
switched to one of the inputs that use the
plasma display (DVD/LD, or another one
of functions listed below), the volume on
the plasma display is muted so only
sound from the receiver is heard.
Function setting for DVD/LD input
• DVD:1 – DVD:5 or TV – Matches the
DVD/LD function of the receiver with a
numbered video input on the plasma
display. For example, DVD:3 matches the
DVD/LD input with video input 3 on the
plasma display.
Function setting for TV/SAT input
• TV:1 – TV:5 or TV – Matches the TV/SAT
function of the receiver with a numbered
video input on the plasma display. For
example, TV:1 matches the TV/SAT input
with video input 1 on the plasma display.
Function setting for DVR/VCR input
• DVR:1 – DVR:5 or TV – Matches the DVR/
VCR function of the receiver with a
numbered video input on the plasma
display. For example, DVR:2 matches the
DVR/VCR input with video input 2 on the
plasma display.