Setting Separate Channel Levels For Listening Modes - Pioneer VSX-D814 Operating Instructions Manual

07 Setting up the receiver
4 Specify the distance from the front left
speaker to your listening position using
and then press ENTER.
5 Use
each channel in turn, pressing ENTER to go
to the next channel when you're done.
Listen to the reference channel and use it to
measure the target channel. Stand facing the
two speakers with your arms outstretched
pointing at each speaker. Try to make the two
tones sound as if they are arriving simulta-
neously at a position slightly in front of you
and between your arm span.
The test tone for channel delay is output in the
same order as step 5:
R
SW
After you have completed all the channels in
your speaker setup, the volume level returns
to normal and COMPLETE, then RESUME
shows in the display.
• Using the MCACC system to set up your
speaker system will overwrite any
previous settings you had for the
STANDARD or ADVANCED SURROUND
modes.
50
En
and to adjust the delay for
C LS
SB RS
Setting separate channel
levels for listening modes
• Default setting: 0 dB
In addition to the MCACC setup, you can also
set relative channel levels from the listening
position using the method below. Using CH
SELECT (see tip below), it is also possible to
set separate channel levels for each of the
listening modes.
DVD/LD TV/SAT
MULTI CONTROL
CD CD-R/TAPE
INPUT ATT FL DIMMER
+10
D.ACCESS
TOP MENU
TUNE
ST
DTV MENU
T.EDIT
TUNE
GUIDE
TV CONTROL
INPUT
TV VOL
SELECT
DTV ON/OFF REC
TUNER
DISPLAY
MPX CH RETURN
AUDIO SUBTITLE
RECEIVER CONTROL
STANDRAD ADV. SURR
MIDNIGHT/
LOUDNESS TEST TONE
SHIFT
CH SELECT
RECEIVER
1 Press RECEIVER.
2 Press STANDARD or ADV. SURR.
(ADVANCED SURROUND).
DVR/VCR TV CONT
TUNER RECEIVER
SR
DISC
ENTER
SETUP
CLASS
MENU
ST
MCACC
SETUP
ENTER
BAND
RETURN
TV CH VOL
DTV INFO MUTE
REC STOP
HDD DVD
CH CH
STEREO SLEEP
LEVEL EFFECT