Philips DL8781 User Manual page 11

2x 1x
Pairing the body analysis scale to your mobile device and
create a user profile
2 Press the measurement unit button again to switch between the
available measurement units: kilograms, pounds and stones.
Your Philips body analysis scale is equipped with Bluetooth® Smart.
Download the Philips HealthSuite health app from the App store or Google
Play. Use the search term 'Philips HealthSuite health app'. The app is
available for iOS 8.0+ and Android 4.4+.
Note: You can only use the Philips HealthSuite health app to communicate
with the scale. It is not possible to use third party applications.
1 Download the Philips HealtSuite health app on your mobile device, start
the Setup wizard and follow the steps to create a user profile and add
the scale.
2 Make sure the app is open and Bluetooth® is on when pairing is in
progress.
-
Keep the mobile device and the scale at transmission distance (no
more than 5 meters from each other, in the same room).
3 To start the pairing process press the measurement unit button for 3
seconds.
-
These symbols are shown on the display alternately, indicating that
the connection is being established.
-
If the connection has been established successfully, the display
shows this symbol.
-
If the connection has failed, the display shows this symbol.
4 In the app, create the profile you want to use for the connection.
-
The scale can create 8 user profiles.
-
If all profiles are in use, choose an existing profile to overwrite.
5 Now step on the scale barefoot to do an initial weighing. That weight is
assigned to your user profile. The scale switches off automatically.
Note: If you want to edit your user profile later on, make sure the scale is
turned on and connected to the health app.
English
11