Adjusting The Brightness Of The Front Light; Calibrating The Touch Screen - Fujitsu iPAD100 series Operation Manual

3.4

Adjusting the Brightness of the Front Light

While the iPAD is on, press the [ENT] key while holding down the [SFT] key to bring up the [System
Information] window. Next, tap [1. Volume and brightness settings].
Volume and Brightness
Volume
Low
Front light
Dark
OFF
(1) In the [Front light] area, specify the
brightness. Tap the
buttons to select the brightness level. The order of choices from the left is off, somewhat dark,
somewhat bright, and bright.
(2) Tap the [×] button on the window to close it.
⌦ This completes the operation.
For Reference
The front light automatically goes off if the
remaining battery charge is too low.
3.5

Calibrating the Touch Screen

The coordinates on the touch panel are misaligned if the touch panel does not respond when you tap
the screen and a location different from where you tapped is entered.
If this situation occurs, correct the misaligned coordinates on the touch panel. This operation is
called "touch screen calibration."
High
Bright
< >
and
29