Alarm; Volume Level - LG LST-280T User Manual

Programming
Disable the Hot Line Feature
1. Press "#"+ "#"+ "3"continuously to enter Hot
Line programming mode.
2. Press "#" and Hot Line Disable code "2".
3. Press " " to save.
Programming the Hot Line Time
1. Press "#"+ "#"+ "3" continuously to enter Hot
Line programming mode.
2. Press "#" and Hot Line Time code "3".
3. Press "#" and enter desired Hot Line Time
(2~10 seconds).
4. Press " " to save.
Note :
- If Hot Line is disabled and Hot Line number has been
already programmed, you can make enable Hot Line
feature by pressing "#"+ "#"+ "3"+ "#"+ "1"+
" " without entering a Hot Line Number again.
24

5.4 Alarm

If alarm feature is enabled, you will hear ring at the
programmed alarm time every day for 1 minute.
Alarm does not ring on the state of hook off,
conversation or no service.
Entering alarm time (12-hour Mode)
1. Press "#"+ "#"+ "4" continuously to enter
Alarm Time programming mode.
2. Press "#" and Alarm Time code "1" for 12-hour
mode.
3. Press "#" and Alarm Time (HHMM +am("1") /
pm("2").
In the forenoon, time range is 0000~1159
*
In the afternoon, time range is 1200~1259
and 0100 ~1159
4. Press " " to save and enable Alarm Time.
Entering alarm time (24-hour Mode)
1. Press "#"+ "#"+ "4"continuously to enter
Alarm Time programming mode.
2. Press "#" and Alarm Time code "2" for 24-hour
mode.
3. Press "#" and Alarm Time (HHMM).
(0000~2359)
4. Press " " to save and enable Alarm Time.
Disable alarm feature
1. Press "#"+ "#"+ "4" continuously to enter
Alarm Time programming mode.
2. Press "#" and Alarm Disable code "2".
3. Press " " to save.
Note :
- If Alarm is disabled and time has been already
programmed, you can make enable Alarm feature by
pressing "#"+ "#"+ "4"+"#"+ "1" + " " without
entering Alarm Time again.
Programming

5.5 Volume Level

There are three kinds of volume to be controlled by
software, and you can set three levels for each volume.
Changing the Conversation Volume Level
1. Press "#" + "#"+ "5" + "1" continuously to
enter Volume Level programming mode.
2. Press "#" and Volume Level (1~3).
"1" - LOW Level
"2" - MIDDLE Level
"3" - HIGH Level
3. Press " " to save.
Before pressing " " you can enter Volume Level
continuously.
Changing the Dial tone Volume Level
1. Press "#" + "#"+ "5" + "2" continuously to
enter Dial tone Volume Level programming
mode.
25