...3 ELECTRICAL CONNECTIONS
3.5 Selecting the Mains Voltage
3.5.1 Wall-mounted Instrument – Fig. 3.7
Note. Some versions are fitted
with a switch in place of links. The
applied voltage should be as
indicated on the switch, when
positioned.
4
Remove front
panel
2
Slacken
captive
screws and
remove
protection
cover
Remove front
panel screws
1
Remove cover (see Fig. 3.1)
Information. Use a small, flat-
blade screwdriver to remove the
screw caps from the case.
Fig. 3.7 Selecting the Mains Voltage –
Wall-mounted Instrument
10
Remove cap
and screw
3
110 V AC
5
3
5
240 V AC
3.5.2 Panel-mounted Instrument – Fig. 3.8
Slide instrument
out of case
2
Undo captive
1
screw
or
240 V AC
Fig. 3.8 Selecting the Mains Voltage –
Panel-mounted Instrument
110 V AC
4
3
or
Note. Some versions are
fitted with a switch in place
of links. The applied voltage
should be as indicated on
the switch, when positioned.