BOOSTER FUNCTION
This function allows the cooking zone to operate at the Booster maximum power (above
the nominal power) for maximum 10 minutes; it could be used, for example, to rapidly heat
up large amount of water .
To activate the Booster function:
The touch control must be switched ON (see section "How to Turn the Touch Control
•
ON and OFF") .
•
Select a cooking zone by touching the relevant display of the cooking zone to be used .
•
Set the power level "
"POWER IGNITION AND ADJUSTMENT OF A COOKING ZONE" . The level "
comes after level "
•
At the end of the Booster program (10 minutes) the cooking zone is automatically set
to the power level "
Warning: When the "Bridge" function is set for the two left cooking zones, the
"Booster" cannot be set for these two zones (the power can only be adjusted up to
9
level "
").
0
-
P
" for the selected cooking zone, as described in the section
9
" .
9
" .
1 2 3 4 5 6 7 8
9 P
+
P
"
17